DIY PCB Circuit Board Welding Equipment Portable 12V Battery Storage Spot Welding Machine Spot Welders Pen For 18650/26650/32650

Parts & Accessories>>>Toys & Hobbies

Brand Name Mitoot

Origin CN(Origin)

Material Metal

Recommend Age 12+y

Tool Supplies Tools

Upgrade Parts/Accessories Spot Welding Machine

RC Parts & Accs Spot Welders Pen

Size Spot Welding Machine

Use Vehicles & Remote Control Toys

Quantity 1

Technical parameters Value 2

Model Number Spot Welders Pen

Remote Control Peripherals/Devices Battery

For Vehicle Type Airplanes

Four-wheel Drive Attributes Spot Welding Machine

Wheelbase Screws

Color

DIY PCB Circuit Board Welding Equipment Portable 12V Battery Storage Spot Welding Machine Spot Welders Pen- Can be welding 18650/26650/32650 lipo battery, it is portable, stable and reliable- System voltage: 11.5V-14.8V- Working current: 100-200ASuggested battery:-36-45ah Lead-acid battery with good performance and small internal resistance (The internal resistance is less than 10 milliohms, and the discharge current is greater than 100A), such as a new car starting battery!)- 4000mah 35C-8000mah 30C 3S model airplane lithium battery- 30-35ah capacity 18650 battery packInstructions for use:Function buttons: 1, used to switch the machine, 2 used to switch gears!When the power is turned on, the default is the first gear. Press the button for 2 seconds to releaseThe gear is increased by one gear, and the buzzer sounds and the LED flashes corresponding to the number of gears.For example: the 3rd gear, the buzzer sounds three times, the LED flashes 3 times, a total of 5 gears. The spot welding intensity is gradually strengthened from the 1st gear to the 5th gear5 is the strongest!After the 5th gear, press and hold the button again. It will power off. In the off state, press and hold the button to power on, and the gear will return to the first gear-This circuit with a 12V battery will become an energy storage spot welding machine for welding nickel pieces such as lithium batteries and nickel-chromium batteries. According to different configurations, the thickness can be about 0.1MM-0.15mmNotice： The 18650 battery and DC power cannot be used as a power supply. It must have a high rate RC battery or a car battery!